The MPAX
Analyzer is best described as a cross between a Logic Analyzer and
Protocol Analyzer, and it carries the best traits from both sides of its
ancestry.
From
the Protocol analysis side, it gets the following characteristics:
Protocol Decoding, Statistical
Analysis, Bit Error Rate (BERT)
analysis, Bus-specific triggering
menu’s, Bus-specific filtering
menu’s, Ultra-deep Memory,
Command-Level, State-Level, and Histogram
Displays, Portable Size.
From the
Logic Analyzer side, it gets the following traits:
Fast Sample Rate, Ability to support other busses, Ability to support
future busses, Powerful programmability of triggering and filtering,
Displays waveforms of bus signals.
MultiBus
is a Protocol Analyzer capable of taking multiple traces from
different types of busses at the same time using the same
reference clock. This product provides a new class of analysis
tools for design, verification, and field engineers who work
with networking, sub-systems, SAN, NAS, complex systems, and
other multiple communication bus applications.
|
|
Busses Supported:
ATA/IDE/UDMA
100 Multi-Interface Analyzer The
ATA/ATAPI Pod turns the MPAX into a full-featured protocol analyzer, with
the depth, ease-of-use, protocol decoding, and statistics that are needed
by software and systems testers.
SCSI
320 Analyzer Pod turns the MPAX into a full-featured protocol
analyzer, with the depth, ease-of-use, protocol decoding, and statistics
that are needed by software and systems testers.
The
PCMCIA & Compact Flash Analyzer Pod turns the MPAX into a
full-featured protocol analyzer, supporting both 3.3V and 5V systems, with
the depth, ease-of-use, protocol decoding, and statistics that are needed
by software and systems testers.
Cardbus
Analyzer Pod turns the MPAX into a full-featured protocol
analyzer, with the depth, ease-of-use, protocol decoding, and statistics
that are needed by software and systems testers.
Gigabit
Ethernet Analyzer Pod turns the MPAX into a full- featured
protocol analyzer, with the depth, ease-of-use, protocol decoding, and
statistics that are needed by software and systems testers.
InfiniBand Analyzer pod supports bidirectional transfers at 1X
speeds (2.5Gb/sec). In addition to decoding all the native and management
InfiniBand protocol, the analyzer also decodes IP packets. With the
deepest memory option, the InfiniBand pod allows the user to store over
1GByte of InfiniBand traffic. Whenever errors are detected, the analyzer
displays the 10b codes as well as the 8b.
Serial
ATA Analyzer Pod turns the MPAX into a full-featured protocol
analyzer, with the depth, ease-of-use, protocol decoding, and statistics
that are needed by software and systems testers.
Logic
Analyzer Pod turns the MPAX into a full-featured logic analyzer,
with the depth, ease-of-use, symbolic decoding, and statistics that are
needed by software and systems testers.
|