Gigabit Ethernet Displays:

The Gigabit Ethernet Pod turns the MPAX into a full- featured protocol analyzer, with the depth, ease-of-use, protocol decoding, and statistics that are needed by software and systems testers. Even so, it still maintains the features needed by hardware engineers such as multi-level triggering, filtering, state configuration, and timing analysis of Gigabit Ethernet packets. At the Command level, the Gigabit Ethernet analyser provides a big-picture view for testers who are troubleshooting system level or application level issues. The State display provides decoding of each Double-word transfer for those needing to monitor Gigabit Ethernet software, device drivers, or firmware. For hardware engineers, the Timing Waveform display shows Gigabit Ethernet Link signal activity.

Gigabit Ethernet analyzer/tester/monitor displays

Gigabit Ethernet Analyzer Run Menu

Gigabit Ethernet Capturing:

The Gigabit Ethernet analyzer provides multiple predefined capture configurations operable in both channel directions, and which can be enable and disable simultaneously, as needed:

  • Timing Mode (Store all transitions)

  • State Mode

    • Capture Errors

    • Ordered Sets (include/exclude idles)

    • DWORDS on

      • Ethernet/ARP/LLC

      • IP/ICMP

      • TCP

      • UDP


Custom State Modes can also be created.

Gigabit Ethernet Analyzer Capture Configuration

Gigabit Ethernet Triggering:

The Gigabit Ethernet Analyzer provides high-level trigger configurations for most of the common trigger scenarios. The high-level triggers each provide drop-down boxes so the user can select specific Tcodes, Commands, Addresses, etc. from a list without memorizing codes or positions. The user can also create and save custom triggers.

Gigabit Ethernet Analyzer Triggering

Gigabit Ethernet Analyzer Trace Filtering:

The Gigabit Ethernet Analyzer provides commonly used high-level filter configurations. Some of the high-level filters provide drop-down boxes for configuration options. The user can also create and save custom filters.

Gigabit Ethernet Filtering

Gigabit Ethernet Statistics:

The Real-Time Monitor can be easily configured by the user
for almost any type of Statistical or Bit Error Rate
measurement desired.

Gigabit Ethernet Analyzer supports Statistical Analysis & Bit Error Rate (BERT)

PROTOCOLS, STANDARDS, & SPEED:

  • PROTOCOLS & STANDARDS:
    • Gigabit Ethernet
    • SCSI
  • SPEEDS:
    • 1.125 Gb/sec
    • 2.250 Gb/sec

Also check out: 

MultiBus is a Protocol Analyzer capable of taking multiple traces from different types of busses at the same time using the same reference clock. This product provides a new class of analysis tools for design, verification, and field engineers who work with networking, sub-systems, SAN, NAS, complex systems, and other multiple communication bus applications.

 

 

.............................

.............................

 

Typical Gigabit Ethernet Cable

The analyzer allows for examining captured data at the Command, State, and Signal levels. The different display formats can be individually displayed or simultaneously displayed. When displayed simultaneously, each display can be automatically synchronized with the others, or used independently. A histogram provides a graphical summary of trace activity for the entire trace and makes it easy to point and click to any position within the trace.

The MPAX's Capture Engine pushes protocol recording to new limits with the following features: Transitional Timestamping, Bandwidth-4.5 Gbytes/sec, Depth-Stores up to 4 Gbytes, Segmentable Trace Buffer    

More Information 

Custom Capture States

Triggering is used to stop the trace when a specific event or sequence of events occurs. The analyzer also provides for stopping when the buffer is full, or looping endlessly until the user manually stops the trace. High-Level triggering options are provided for each bus. The user can also create custom triggers using the powerful Trigger Sequencer. More Information

Custom Triggering

Pre-configured filters for each bus allow the user to conserve buffer space and reduce the stored data to those items that are of interest. Custom filters can also be created. More Information

Custom Filters

Dedicated hardware is provided for counting events. Software processes this data providing simple totals, or ratios of events per time or per other events, such as Transfers per Second, Transfers per Command, Errors per Second, or Data Transfers per Error.  These ratios are shown as Current Values, Average Values, and Peak Values, providing a summary of the changes over time.

The analyzer decodes many of the high-level protocols that are transmitted on each bus. The Command listing is typically used for displaying high-level protocols which may be transferred across a bus, while the State Listing typically displays native, low-level protocols.

 

________________________________________________________________________________________________

Company | Services | Contact | Trade Shows & Links | Employment | Testimonial | Site Map | Product Demo | | Travel

Call Us @ 805.376.6048 

Copyright 2002 Computer Bus Tools, Inc. All Rights Reserved.      

CBT Team Cafe